Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Volkswagen Polo front bumper removal

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo III, Polo 3, MK III, 6N, MK 3 - Years 1994-2003
Part: Front bumper
Operation: Volkswagen Polo front bumper removal

In this video tutorial we will see how to remove the front bumper of a Volkswagen Polo. First we are going to remove the front fenders from both sides, going to remove all the fixing screws: then we disassemble the grilles of the front fog lights and remove the additional screws underneath. At this point we remove the front lights, unscrewing the fixing screws and disconnecting the electrical connectors and unscrew the upper screws of the bumper; we just have to release and remove the bumper gently, as shown in the video. Follow the video to the end!


Posted on 2 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2009-2017 - What is the cost to replace the front bumper on the Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos