Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Dipped Beam Bulb on Volkswagen Golf 6

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Headlight bulb

Raise the bonnet and secure it. Look at the area behind the affected headlamp, inside the engine bay: you will notice a round rubber cover behind the dipped beam bulb. Remove this cover as shown in the video, then unclip the small metal clip holding the bulb, slightly unscrew it, and extract it. The procedure is the same on both sides. Simply reverse the process to fit the new bulb. The video also shows how to switch to an LED bulb if you're interested. Good luck!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb on a Volkswagen Golf
Replacing the Headlight Bulb on a Volkswagen Golf
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) In today's tutorial, learn how to replace the dipped beam bulb of the front headlight on a Volkswagen Golf, third generation model produced from 1991…
Replacing Cabin Air Filter
Replacing Cabin Air Filter
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The cabin air filter housing is located on the passenger side, just below the glove compartment, near the scuff plate. Remove the plastic cover secur…
Replacing the Reverse Light Bulb on a Volkswagen Golf
Replacing the Reverse Light Bulb on a Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In a few simple steps, follow the procedure to remove and replace the reverse light bulb on a Volkswagen Golf. First, move to the rear and open the b…

    Frequently Asked Questions

    • Golf 2003-2008 - How to remove the headlight bulb of a Volkswagen Golf? Read answer

Resetting the Tyre Pressure Warning Light on the Hyundai I20

Today, let's look at the instructions to reset the tyre pressure warning light on the Hyundai I20 in simple and quick steps. The vehicle is equipped with an automatic TPMS that constantly monitors tyre pressures; when an anomaly occurs, the system triggers an alarm, displaying the relevant warning light on the dashboard. So, restore the tyre pressures, which will automatically reset the TPMS light on the dashboard; finally, turn off the ignition and start the engine!

Watch the video!


by ScegliAuto

More videos