Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Parameter Check and Maintenance.

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Engine

Modern vehicles are equipped with computers that facilitate driving and effectively monitor the correct functioning of the engine and its associated systems. Using an external computer, it is possible to check all parameters and intervene in case of malfunction. For this operation, a specific software program called VCDS is required, which can physically connect to the vehicle's control unit and, through the appropriate menus, read the data, allowing for the viewing and reprogramming of parameters. Although the operation is relatively simple, it requires adequate technical preparation and instrumentation.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Volkswagen Passat
Resetting the Service Light on the Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) When the service interval for the Volkswagen Passat approaches, a warning appears on the dashboard. After completing the necessary operations, you mu…
Tyre Pressure Check Instructions
Tyre Pressure Check Instructions
Volkswagen Passat (2010-2014 / B7) Inside the fuel filler flap, there is a label indicating the pressure level to which you should inflate the tyres, depending on the size and load con…
Throttle Body Check and Calibration.
Throttle Body Check and Calibration.
Volkswagen Passat (1996-2005 / 3BG, B5) Modern vehicles are equipped with computers that facilitate driving and effectively monitor the correct functioning of the engine and its associated …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos