Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Injectors on the Volkswagen Up! 1.0 MPI

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Fuel injectors

Video tutorial

In this video, see the instructions that will allow you to remove and replace the fuel injectors, performing a functionality test, on the Volkswagen Up! 1.0 MPI. First, open the bonnet of your car and start by unscrewing the two fixing screws of the rail using a T30 torx screwdriver; then disconnect the electrical connectors of the injectors.

At this point, release the side clips to remove the injectors as shown in the video; proceed with cleaning or directly replacing them, applying the reverse procedure for reassembly!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Volkswagen Up! 1.0 MPI
Replacing the Timing Belt on the Volkswagen Up! 1.0 MPI
Volkswagen Up (2011-2024 / MK 1) In this video tutorial, follow the main steps to remove and replace the timing belt on the Volkswagen Up! 1.0 MPI. First, open the bonnet of your car…
Guide to Replacing the Timing Belt on the Volkswagen Up 1.0 MPI
Guide to Replacing the Timing Belt on the Volkswagen Up 1.0 MPI
Volkswagen Up (2011-2024 / MK 1) This guide outlines the steps for removing and replacing the timing belt on the Volkswagen Up 1.0 MPI. First, open the bonnet of the vehicle and begi…
Guide to Replacing the Timing Belt on a Volkswagen Up 1.0 MPI
Guide to Replacing the Timing Belt on a Volkswagen Up 1.0 MPI
Volkswagen Up (2011-2024 / MK 1) In this guide, you will find instructions to help you remove and replace the timing belt on a Volkswagen Up 1.0 MPI. First, open the vehicle's bonnet…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos