Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on the Volkswagen Golf 5

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Front bumper

In today's video tutorial, you will see the instructions on how to remove the front bumper on the fifth series Volkswagen Golf in simple and quick steps. First, open the bonnet and start by unscrewing the screws located at the top of the bumper, removing the plastic cover; then unscrew the additional screws found underneath using a Torx screwdriver. At this point, remove the screws located on both sides of the wheel arches and under the bumper; all that’s left is to gently detach the front bumper by levering it from the sides, as shown in the video!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to disassembling the front bumper of the Volkswagen Golf
Guide to disassembling the front bumper of the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The steps outlined in this guide will allow us to dismantle and replace the front bumper of the Volkswagen Golf. First, we open the hood of the car a…
Removing the Front Bumper of the Volkswagen Golf
Removing the Front Bumper of the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today, we will discover the instructions that will allow you to remove and replace the front bumper of the Volkswagen Golf in simple steps. First, op…
Removing the Front Bumper on Golf 4
Removing the Front Bumper on Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Replacing the front bumper on the Golf 4? Not sure how to do it? Unscrew the fastening bolts located at the top of the bumper (after removing the fro…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos