Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the Service light on a Volkswagen Golf?

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Service warning light

To reset the Service light on a Volkswagen Golf, press and hold the right button located at the bottom of the instrument cluster. While holding it, turn the ignition key to switch on the instrument cluster. The word "Service" will appear on the small display under the speedometer: by turning the button on the left of the instrument cluster, the remaining miles until the next service will be displayed. Simply switch off and then switch on the instrument cluster to reset the light: after performing this operation, you will see that the Service light is off.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The steps to reset the service light on the Volkswagen Golf are the same as those for the Volkswagen Jetta. To reset the service light related to the…
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) To reset the Service light shown on the instrument panel of the Volkswagen Golf 8, you will need to turn on the ignition by inserting the ignition ke…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Resetting the service light on the Volkswagen Golf 5 is a straightforward task performed after each mandatory service. First, insert the key into the…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos