Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Passat
  6. : How to remove the heating radiator on the Volkswagen Passat B6

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat 3C, B6 - Years 2005-2010
Part: Passenger compartment heating radiator
Operation: How to remove the heating radiator on the Volkswagen Passat B6

Let's find out the procedure that we will need to remove the radiator from the passenger compartment heating on the Volkswagen Passat B6, but also on the Golf 5. First we open the engine hood and disconnect the heating radiator fluid pipes; then we are going to remove the plastic cover that we find near the pedal board and we are going to unscrew the screws of the radiator brackets. At this point we disconnect the inlet and outlet pipes of the liquid to remove it; we just have to replace it with the new one and reassemble everything, following the video tutorial to the end!


Posted on 14 March 2024 by ScegliAuto



How to remove the passenger compartment heating radiator of a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Before we can start, we will have to open the front hood of our Volkswagen Passat. So let's start by disengaging and removing the air filter sleeve.
How do you replace the heating radiator of the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) The replacement of the heating radiator of the Volkswagen Passat is done by loosening the screws that secure the side protection panel of the footwel
How to replace the heating radiator on the Volkswagen Passat B5
Volkswagen Passat (1996-2005 / 3BG, B5) Let's find out the main steps to remove and replace the internal radiator of the passenger compartment heating on the Volkswagen Passat B5. First of

    Frequently Asked Questions

    • Passat 2005-2010 - Where is the Volkswagen Passat heating radiator located? Read Answer
    • Passat 2005-2010 - Where is the interior heating radiator of the VW Passat b6? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos