Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Coolant Temperature Sensor

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Engine coolant temperature sensor

To replace the temperature sensor, open the bonnet and locate it in the position shown in the video. It is located low on the right side of the engine block and should be green, as shown in the video. To extract it, first remove the clip, which is a flat piece open on one side like a fork. Then, extract the clip to free the temperature sensor. This is not only a replacement but also a check, as I had coolant leaks upon reassembling the sensor. If you need to replace the temperature sensor, be very careful to reposition the rubber ring that acts as a sealing gasket to avoid coolant leaks. It is a simple operation that, if done carefully, can save you the cost of a garage intervention. Car model: VW GOLF 2.0 petrol manual year 2001.
Necessary tools: straight and/or curved fine-nose pliers.

Updated on 9 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this guide, you will see the main instructions on how to remove and replace the coolant temperature sensor from the engine of the Volkswagen Golf …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this brief and simple guide, you will learn how to remove and replace the coolant temperature sensor on the Volkswagen Golf 1.6 TDI. First, open t…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) This short guide will show us how to disassemble and replace the engine coolant temperature sensor of the Volkswagen Golf 1.4 16V. First, we open the…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos