Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clutch Pump on the Volkswagen Jetta MK4 - Golf MK4

Model: Volkswagen Jetta A4, MK 4 - Years 1998-2005
Part: Pump

Discover the main instructions in this video for removing and replacing the clutch pump or master cylinder on the fourth series Volkswagen Jetta, as well as the Golf 4. First, open the bonnet and locate the clutch master cylinder, found low down near the air filter box; then disconnect the wiring and loosen the pump bolt to remove it. At this point, replace it with the new one, topping up the fluid; repeatedly press the clutch pedal to circulate it.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the clutch pump on the Volkswagen Jetta?
How to replace the clutch pump on the Volkswagen Jetta?
Volkswagen Jetta (1998-2005 / A4, MK 4) To replace the clutch pedal pump on the Volkswagen Jetta, remove the plastic cover of the dashboard located immediately under the steering column and…
How to Replace the Windscreen Washer Pump of the Volkswagen Jetta - Golf
How to Replace the Windscreen Washer Pump of the Volkswagen Jetta - Golf
Volkswagen Jetta (1998-2005 / A4, MK 4) Today, in this short and simple guide, you will learn how to remove and replace the windscreen washer pump of the Volkswagen Jetta, as well as the Go…
How to Remove and Replace the Clutch Pump on the Volkswagen Jetta
How to Remove and Replace the Clutch Pump on the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) In this tutorial, follow the main instructions to remove and replace the master cylinder or clutch pump on the Volkswagen Jetta. First, open the bonn…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos