Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Clutch Pump in a Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Pump

See other generations:
Video tutorial

In this tutorial, see how to remove the clutch pump in a Volkswagen Jetta, a task that requires good manual skills. First, open the bonnet, then disconnect both battery terminals and remove the battery, its base, and the air filter housing.

Next, locate the expansion tank for the fluid system, remove it, and unscrew the two bolts securing the pump. At this point, you can remove the pump from its housing, insert the replacement, and reassemble everything by following the reverse procedure.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

Volkswagen Jetta (1998-2005 / A4, MK 4) Below are the main instructions that will allow you to remove and replace the fuel pump on a Volkswagen Jetta. First, open the rear doors and begin t…
Volkswagen Jetta (2005-2010 / MK 5, A5) In this guide we will see the instructions that will allow us to disassemble and replace the fuel pump of the Volkswagen Jetta, in simple steps. Firs…
Volkswagen Jetta (2005-2010 / MK 5, A5) In this tutorial, follow the main instructions to remove and replace the master cylinder or clutch pump on the Volkswagen Jetta. First, open the bonn…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos