Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Number Plate Lights on a Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: License plate light

In today's tutorial, you will learn how to remove and replace the number plate bulbs on a Volkswagen Golf by following the instructions below. First, move to the rear of your car and start by removing the number plate light covers, prying them off from the sides; then disconnect the electrical connectors from the bulbs, along with the bulbs themselves, as shown in the video. At this point, remove the small bulb from the holder and replace it with a new one, inserting it the correct way; finally, refit the light covers!

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Bulbs on a Volkswagen Golf 6
How to Replace the Number Plate Bulbs on a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To replace the number plate lights with LED ones on the Volkswagen Golf 6, start by unclipping the light unit from the bumper of the car, disconnect …
How do you replace the license plate light bulb of the Volkswagen Golf?
How do you replace the license plate light bulb of the Volkswagen Golf?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) In order to replace the license plate light bulb of the Volkswagen Golf, you need to use a tool to pry off the corresponding overhead light located j…
Replacing Number Plate Lights on Golf 4
Replacing Number Plate Lights on Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Are the number plate bulbs on your Volkswagen Golf 4 blown? Here’s how to change them. Use a screwdriver to remove the screws securing the light unit…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos