Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of LED Number Plate Lights on VW Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: License plate light

Replacing the bulbs of the number plate lights with LED type will give the vehicle a much more modern and appealing look, as well as significantly improve the visibility of the number plate; in fact, it is very easy to find in the aftermarket the complete lamp holder with LED bulb, ready for installation in the relevant location of the bumper; therefore, locate the original lamp holder positioned just above the number plate, below the boot trim of the bumper, press on the fixing tab and pull it out from its seat while disconnecting the relevant power connector; proceed in reverse for the installation of the LED one.

Updated on 23 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Number Plate Bulbs on a Volkswagen Golf 6
How to Replace the Number Plate Bulbs on a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To replace the number plate lights with LED ones on the Volkswagen Golf 6, start by unclipping the light unit from the bumper of the car, disconnect …
Replacing Number Plate Lights on Golf 4
Replacing Number Plate Lights on Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Are the number plate bulbs on your Volkswagen Golf 4 blown? Here’s how to change them. Use a screwdriver to remove the screws securing the light unit…
Installation of LED Interior Lights
Installation of LED Interior Lights
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Replacing the interior lighting bulbs with LED types will make the cabin brighter and give the car a more modern and appealing look. Start with the f…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos