Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Reminder on the Volkswagen Nivus

Model: Volkswagen Nivus MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Warning light – error code

Video tutorial

When performing scheduled maintenance (oil change service), you will need to reset the warning signal for reaching the mileage due for the service. To reset the signal, follow these steps: open the door and sit in the driver's seat.

Locate the instrument cluster, at the bottom, between the odometer and the tachometer, two buttons, one of which is labeled "00/SET". To reset the service, press both buttons simultaneously and then turn on the ignition.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

Volkswagen Nivus (2020-2026 / MK 1) You can completely clear the Service light on the Volkswagen Nivus by turning on the instrument cluster, inserting the key into the ignition. Once th…
Volkswagen Nivus (2020-2026 / MK 1) Today, we will go over the main instructions for resetting the maintenance service light for the engine oil change on the Volkswagen Nivus. First, ge…
Volkswagen Nivus (2020-2026 / MK 1) You can completely clear the Service light displayed on the instrument cluster of the Volkswagen Nivus by turning on the display to navigate the menu…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos