Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Up
    4. : How to reset the Volkswagen Up service warning light

Volkswagen Up - Video tutorial

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Instrument cluster
Operation: How to reset the Volkswagen Up service warning light

In today's video you will see how to remove the expired service notice in the Volkswagen Up. This video also applies to the twins Seat Mii and Skoda Citigo. First get into the car and take a seat on the driver's side. Now insert the key in the ignition socket. Locate the button on the instrument panel and keep it pressed; at the same time turn the key to position one. After a few seconds the operation will be performed and you will no longer see the annoying message. Remember to carry out this operation after having serviced your car or carried out the necessary checks.


Posted on 8 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Volkswagen Up 2011-2024 - What to do when the EPC light turns on in a Volkswagen Up? Read Answer
    • Volkswagen Up 2011-2024 - What does it mean when the tire pressure warning light comes on in a Volkswagen Up? Read Answer
    • Volkswagen Up 2011-2024 - What does the Volkswagen Up tire warning light mean? Read Answer
    • Volkswagen Up 2011-2024 - How do you reset the tire pressure warning light on the Volkswagen Up? Read Answer
    • Volkswagen Up 2011-2024 - What does the Volkswagen Up EPC warning light mean? Read Answer
    • Volkswagen Up 2011-2024 - How do you reset the VW Up SERVICE lamp? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos