Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on a Volkswagen Polo?

Model: Volkswagen Polo Polo 3, MK III, 6N, Polo III, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Antenna

See other generations:
Video tutorial

To replace the antenna on a Volkswagen Polo, open the rear hatch of the car to detach the headlining at the back. Once the panel under the roof is removed, you can unscrew the bolt underneath that secures the antenna from the inside.

By unscrewing this bolt, you can pull the antenna out from the outside of the car, allowing for its replacement with a new one: the new part should then be positioned and secured by tightening the corresponding bolt from the inside.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

Replacement of the Volkswagen Polo antenna
Replacement of the Volkswagen Polo antenna
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this short guide, we will see the main instructions on how to disassemble and replace the antenna of the Volkswagen Polo car radio. First of all, …
How to Replace the Antenna on a Volkswagen Polo 1.2 L Highline
How to Replace the Antenna on a Volkswagen Polo 1.2 L Highline
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) .. In this video tutorial, you will see how to replace the antenna on a Volkswagen Polo 1.2 L Highline by following a few simple steps: use a.. …
How to Replace the Antenna on a Volkswagen Polo?
How to Replace the Antenna on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the antenna on a Volkswagen Polo, open the tailgate to leverage an object and detach the headlining at the rear of the vehicle. Once the h…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos