Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Passat B6

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Service warning light

See other generations:
Video tutorial

In this new guide regarding the Volkswagen Passat B6, you will learn a very simple yet effective method to reset the service light without any problems and in just a few seconds. Before you begin, ensure that the car is completely off. Locate the button with a small spanner symbol on the right side of the dashboard and hold it down.

At the same time, turn on the ignition and wait a few seconds. At this point, release the button and press the one located just below the rev counter once.

Finally, turn off the ignition and you are done.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volkswagen Passat
How to Reset the Service Light on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) If the service light appears on the dashboard of your Volkswagen Passat (2010-2014) even after servicing the vehicle, do not worry as you can manuall…
How to Reset the Service Light on the Volkswagen Passat B7
Volkswagen Passat (2010-2014 / B7) If you want to manually reset the service light that keeps coming on in your Volkswagen Passat B7 (2010-2014), just follow these simple steps. First,…
How to Reset the "Service" Light on a Volkswagen Passat
How to Reset the "Service" Light on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Before you can begin, sit in the driver's seat of your Volkswagen Passat. Start by pressing and holding the spanner-shaped button located above the i…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos