Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Coolant Temperature Sensor

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Engine coolant temperature sensor

See other generations:
Video tutorial

This video shows how to change the coolant temperature sensor on a Volkswagen Passat. It is not a straightforward task as the sensor is located in a position that is not very easy to reach.

Once you locate the sensor, use pliers or a screwdriver to remove the clips around the coolant pipe. Now, you can detach the intake manifold cover with your hands.

There is still a cable obstructing the view of the sensor: move it after releasing the clips holding it in place. Next, use a screwdriver to unclip the horseshoe clips that secure the sensor.

With some effort, free the sensor, which remains attached only by the electrical connection. Disconnect it by pressing the clip on the connector.

Keep the old sensor's O-ring and take a new one. Position it as before, applying the horseshoe clip and connecting it to the connector. Reassemble everything as it was.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

How to Change the Coolant Temperature Sensor on a Volkswagen Passat 1.8T
How to Change the Coolant Temperature Sensor on a Volkswagen Passat 1.8T
Volkswagen Passat (1996-2005 / 3BG, B5) In this guide, find the instructions to remove and replace the coolant temperature sensor on a Volkswagen Passat 1.8T. First, open the bonnet and loc…
Replacing the Coolant Temperature Sensor
Volkswagen Passat (1996-2005 / 3BG, B5) Open the bonnet and locate the temperature sensor under the windscreen. Remove the two hose clamps on the water duct to detach the control block. The…
Replacement of Coolant Temperature Thermostat
Volkswagen Passat (1996-2005 / 3BG, B5) Open the engine bonnet and disconnect the negative terminal of the battery for safety. Raise the vehicle on the lift. The sensor is located on the en…

How to Set the Clock on a Fiat Scudo

Setting the time on a Fiat Scudo is a simple and quick operation. First, turn on the vehicle's onboard computer and then press the SET button located on the dashboard. The settings menu will appear on the display; press the "+" button to select the "TIME" option using the "SET" button. Once in the clock menu, you can choose the format and adjust the hours and minutes by pressing the "+", "-" and "SET" buttons. When finished, return to the main menu and then turn off the ignition to complete the reset.

Watch the video!


by ScegliAuto

More videos