Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Tail Lights on the Volkswagen Amarok?

Model: Volkswagen Amarok MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tail light bulb

See other generations:
Video tutorial

Removing the tail lights on the Volkswagen Amarok is a straightforward task, as shown in the attached video tutorial. Start by opening the tailgate, locate and unscrew the two screws of the light unit on the side edge, as demonstrated in the video.

Grip the light unit and pull it out, disengaging the internal clips. At this point, after disconnecting the connector, you can remove the internal plate where the bulbs are located by unscrewing the two indicated screws.

Finally, proceed to replace the bulb in question.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

Volkswagen Amarok (2010-2021 / MK 1) The designated fuse boxes in the Volkswagen Amarok house the fuses that control the operation of the devices installed in the vehicle: there are two …
Volkswagen Amarok (2010-2021 / MK 1) In the Volkswagen Amarok, the fuses are located in specific boxes within the vehicle: this model has two. The first is located in the engine compartm…
Volkswagen Amarok (2010-2021 / MK 1) The fuse boxes of the Volkswagen Amarok are responsible for containing the fuses that regulate the functioning of the devices inside the car: in this…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Adjust the Headlights on a Volkswagen Golf 7

This brief video tutorial shows the necessary steps to manually adjust the headlights on a seventh-generation Volkswagen Golf, produced from 2012 to 2019. Adjusting the dipped beam headlights is a very simple task. Open the bonnet and locate the adjustment screw at the back of the headlights as shown in the video. Once located, use a 6 mm Allen key to turn the screw clockwise or anti-clockwise to raise or lower the beam.

Watch the video!


by ScegliAuto

More videos