Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Adjusting the Clock on a Volkswagen Up

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Clock

The video shows how to adjust the clock on a Volkswagen Up. It is a very simple operation that requires minimal skill and only a few seconds. First, press the button located at the bottom left of the instrument panel. At this point, you can set the time. Press the button at the bottom right of the instrument panel repeatedly to select the desired hour. Wait a few seconds to 'freeze' the chosen hour. Follow the same procedure for the minutes. Then, press the button at the bottom left to exit the setting.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on the Volkswagen Up
How to Set the Time on the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) If you need to change the time on this vehicle, you can do so as follows, using images from the video for assistance. First, sit in the driver's seat…
How to adjust the time on the Volkswagen Up
How to adjust the time on the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) These short and simple instructions will show us how to adjust the time on the display of the instrument panel on the Volkswagen Up. First of all, we…
How to Set the Time on a Volkswagen Up
How to Set the Time on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Before you begin, sit in the driver's seat of your Volkswagen Up. Start by activating the instrument cluster by turning the key in the ignition barre…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos