Do it yourself
| ||||
|
Volkswagen Golf - Video tutorial
Model: Volkswagen Golf
Golf 6, MK 6, 5K1, Golf VI
- Years 2008-2012 In order to replace the third brake light bulb of the Volkswagen Golf, you need to use an object that acts as a lever to be able to extract the ceiling light from inside its housing. Once the headlight has been completely removed, you will need to unplug the connector attached to the rear and remove it completely. At this point it will be possible to remove the bulb from the inside or completely replace the headlight. The latter can then be connected to the appropriate connector and inserted into its housing, checking that the bulb is working correctly.
Posted on 19 July 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.027
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |