Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Golf
  6. : How to replace the third brake light bulb on the Volkswagen Golf?

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf MK 6, Golf 6, Golf VI, 5K1 - Years 2008-2012
Part: Light bulb
Operation: How to replace the third brake light bulb on the Volkswagen Golf?

In order to replace the third brake light bulb of the Volkswagen Golf you have to pry an object in order to extract the ceiling light from its housing. Once this has been extracted, it will be possible to replace the bulb after disconnecting the connectors. The old bulb can be removed from its housing and replaced with a new spare part. Once the new bulb has been inserted in its housing, it will be possible to fit the ceiling light again and check the correct functioning of the piece installed.


Posted on 3 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Golf 2008-2012 - Why is the sun visor light on the Volkswagen Golf not working? Read Answer
    • Golf 1997-2003 - How do you replace the reverse gear bulb in the Volkswagen Golf 4? Read Answer
    • Golf 2012-2019 - How to eliminate the led lights error on Volkswagen Golf? Read Answer
    • Golf 1997-2003 - Why don't my Volkswagen Golf door lights work? Read Answer
    • Golf 2008-2012 - How to eliminate the malfunction warning light in the Volkswagen Golf 6? Read Answer
    • Golf 2003-2008 - How to replace the sidelight bulb on the Volkswagen Golf 5? Read Answer
    • Golf 2012-2019 - Which bulbs to use for the sidelights of the Volkswagen Golf 7? Read Answer
    • Golf 2008-2012 - What to do if the reverse light does not work in the Volkswagen Golf 6? Read Answer
    • Golf 2008-2012 - How much do the sidelights on the Volkswagen Golf 6 cost? Read Answer
    • Golf 2008-2012 - How to replace the sidelight bulbs in the Volkswagen Golf 6? Read Answer
    • Golf 2012-2019 - What is the list of bulbs in the Volkswagen Golf 7? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos