Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light Bulb on the Volkswagen Golf?

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part:

See other generations:
Video tutorial

To replace the third brake light bulb on the Volkswagen Golf, use a tool to pry off the ceiling light completely from its housing: once it is removed, you can disconnect the connector attached to the ceiling light and extract the LEDs inside by unscrewing the screws that hold them in place.

After replacing the LEDs with new spare parts, reconnect the ceiling light to the appropriate connectors and insert it back into its housing at the rear.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light Bulb on the Volkswagen Golf?
How to Replace the Third Brake Light Bulb on the Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the third brake light bulb on the Volkswagen Golf, use a tool to lever out the light unit from its housing. Once it is removed, you can re…
How to Replace the Third Brake Light on a Volkswagen Golf
How to Replace the Third Brake Light on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the third brake light on a Volkswagen Golf 6, open the tailgate and hold it in the open position. Remove the internal panel of the tailgat…
How to remove the third brake light of the Volkswagen Golf
How to remove the third brake light of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The following steps will show us how to disassemble and replace the third brake light and its bulbs on a Volkswagen Golf. First, move to the back and…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos