Do it yourself
| ||||
|
Volkswagen Routan - Video tutorial
Model: Volkswagen Routan
MK 1
- Years 2009-2014 Before starting to disassemble the rear wiper arm of our Volkswagen Routan, make sure you have all the necessary material at hand so as not to have to interrupt the work once it has started. The first step for this replacement is to unhook the plastic cover that hides a 13mm nut. This must be unscrewed with a wrench of the same size. In the pin now left free we insert the special tool that contends to free the wiper arm. Before inserting the new wiper arm we clean the pin, then tighten the nut and reposition the plastic cover.
Posted on 4 September 2022 by ScegliAuto
Other guides that may interest you |
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |