Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Tail Light Bulb on a Volkswagen Routan?

Model: Volkswagen Routan MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light bulb

Video tutorial

To replace the rear tail light bulb on a Volkswagen Routan, open the rear hatch so you can loosen the screws securing the tail light in its housing. Once these screws are removed, pull the tail light out of its housing to extract the bulb inside.

This bulb should then be disconnected from its connector and replaced with a new one; finally, connect the new bulb to the connector and insert it back into the tail light housing.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Volkswagen Routan
How to Replace the Cabin Air Filter in a Volkswagen Routan
Volkswagen Routan (2009-2014 / MK 1) If you own a Volkswagen Routan and want to replace the cabin air filter yourself, just follow the steps outlined below. Before you start, make sure t…
Replacing the Front Wheel Bearing on a Volkswagen Routan
Replacing the Front Wheel Bearing on a Volkswagen Routan
Volkswagen Routan (2009-2014 / MK 1) In this brief and simple guide, you will learn how to remove and replace the front wheel bearing on a Volkswagen Routan. First, lift the vehicle and …
How to Replace the Key Battery in the 2011 Volkswagen Routan
How to Replace the Key Battery in the 2011 Volkswagen Routan
Volkswagen Routan (2009-2014 / MK 1) The smart key for your 2011 Volkswagen Routan has a very simple and minimalist design that makes replacing the battery inside even easier and quicker…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos