|
Do it yourself
| |||
| ||||
Replacing the Front Wheel Bearing on a Volkswagen Routan
Model: Volkswagen Routan
MK 1
- Years:
2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
In this brief and simple guide, you will learn how to remove and replace the front wheel bearing on a Volkswagen Routan. First, lift the vehicle and start by removing the front wheel. Next, remove the front brake caliper from the brake rotor by unscrewing the bolts located on the back. Now, remove the brake rotor by unscrewing the central bearing nut with a socket wrench and extension. Then, remove the wheel bearing and replace it with the new one, installing it securely until it is fully seated.
Updated on 15 May 2026 by ScegliAuto
Related tutorials
Volkswagen Routan
(2009-2014 /
MK 1)
To replace the radiator on a Volkswagen Routan, open the hood to access the screws securing the plastic cover at the front of the engine compartment.…
Volkswagen Routan
(2009-2014 /
MK 1)
If you own a Volkswagen Routan and want to replace the cabin air filter yourself, just follow the steps outlined below. Before you start, make sure t…
Volkswagen Routan
(2009-2014 /
MK 1)
From the dashboard of the Volkswagen Routan, you can clear the Service light by inserting the ignition key into the ignition switch and turning it to…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |