Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Spare Tire from a Volkswagen Routan Mk1

Model: Volkswagen Routan MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Wheel

Video tutorial

This guide shows how to remove the spare tire from a Volkswagen Routan Mk1. The first step is to take the tire removal kit, which also contains the jack, and assemble the tire removal lever. This kit is located in the trunk, in the left compartment.

Insert the lever into the designated hole, located inside the cabin, at the base of the center console, and unscrew the wheel winch. When the tire is completely on the ground, remove the fastening pin from the center of the wheel rim and replace the tire.

Reassembly is done by reversing the steps.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

Volkswagen Routan (2009-2014 / MK 1) The spare tire on the Volkswagen Routan is located at the bottom of the vehicle, near the front seats. To access it, open the rear trunk and go to th…
Volkswagen Routan (2009-2014 / MK 1) In this brief and simple guide, you will learn how to remove and replace the front wheel bearing on a Volkswagen Routan. First, lift the vehicle and …
Volkswagen Routan (2009-2014 / MK 1) If you own a Volkswagen Routan and want to replace the cabin air filter yourself, just follow the steps outlined below. Before you start, make sure t…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos