Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Appearance of Alloy Wheels with Vinyl Wrap

Model: Audi A5 8W6 - Years 2018-2025
Part: Wheel rim

In this video, you can see how to change the appearance of the alloy wheels on your vehicle (in this case, it is an Audi RS5, but naturally, you can operate in the same way on any model). This can be particularly useful if the wheels have suffered some damage (scratches, chips) as covering them with the wrap will hide these small issues. As shown in the video, this is a task that can be done by someone with a steady hand and patience. You need to apply the wrap over the entire wheel, adhere it with a heat gun, and then pierce the wrap at the spokes. Then, with great care and a sharp knife, follow the contours of the wheels to remove the excess vinyl, and there you have it.

Posted on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Key Battery of the Audi A5
How to Change the Key Battery of the Audi A5
Audi A5 (2018-2025 / 8W6) To quickly replace the battery located inside your Audi A5 key, carefully read the following guide and apply all the steps described. First, take the…
How to Change the Coolant in an Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) Do you want to replace the coolant in your A5? Lift the car and remove the protective plastic cover. Unscrew the tap located above the radiator hose …
How do you change the language of the onboard computer on the Audi A5?
How do you change the language of the onboard computer on the Audi A5?
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) In order to change the language of the onboard computer on the Audi A5, you need to turn on the instrument panel and then press the SETUP button loca…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos