Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Volkswagen T-Roc

Model: Volkswagen T Roc MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Cabin air filter

See other generations:
Video tutorial

This video illustrates how to replace the cabin filter in a Volkswagen T-Roc. As the first step, locate your work area in the front passenger seat. Use a torch to assist with these steps.

Proceed to remove the glove compartment by taking out all the securing screws to access a fuse panel and another black plastic section on the right. This latter section will house the cabin filter.

To remove it, simply pull it out towards you to insert the new cabin filter.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in the Volkswagen T-Roc
How to Replace the Cabin Filter in the Volkswagen T-Roc
Volkswagen T Roc (2017-2025 / MK 1) To discover how to replace the cabin filter in your Volkswagen T-Roc (2017-2023), carefully read the following guide and follow the steps described. …
How to change the cabin air filter of the Volkswagen T-Roc.
How to change the cabin air filter of the Volkswagen T-Roc.
Volkswagen T Roc (2017-2025 / MK 1) Let's see how to replace the cabin air filter in a Volkswagen T-Roc: the filter is located behind the glove compartment on the passenger side. After …
How to Activate Ambient Light in Volkswagen T-Roc
How to Activate Ambient Light in Volkswagen T-Roc
Volkswagen T Roc (2025-2026 / MK 2) Activating the ambient light or lights, in the case of the Volkswagen T-Roc, involves not only illuminating the cabin but also personalising the colo…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos