Do it yourself
| ||||
|
Volkswagen Taos - Video tutorial
Model: Volkswagen Taos
MK 1
- Years 2021-2024 The guide shows the procedure for resetting the Volkswagen Taos tire pressure warning light. With the instrument panel on, press the â € œMENUâ € button located on the radio. From the service menu, select the "VEHICLE" tab and then select the vehicle settings tab. At this point, select the item relating to tires to enter the tire settings menu. Select the tire pressure reset item and accept the procedure. Before carrying out this operation, check the correct tire pressure value. When the restore is complete, the success message will be shown.
Posted on 22 September 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |