Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gear Oil in a Volkswagen Lupo

Model: Volkswagen Lupo MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Transmission fluid

Video tutorial

Lift the Volkswagen onto the ramp. Remove the protective cover by unscrewing the securing bolts.

Locate the two bolts and remove them to take off the plug, allowing all the oil to drain out. Now, refit everything. Once you have located the front point to top up the oil, proceed according to the manufacturer's instructions for this operation.

Now close it up and lower the car from the ramp. Start the engine and after a short while, check the levels again; top up if necessary.

Once done, the operation is complete.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Change the Front Windscreen Wiper Blade on a Volkswagen Lupo?
How to Change the Front Windscreen Wiper Blade on a Volkswagen Lupo?
Volkswagen Lupo (1998-2005 / MK 1) Changing the wiper blade on the Volkswagen Lupo is a straightforward task that requires no special tools. Start by lifting the wiper arm and then det…
When and How to Change the Timing Belt on the Volkswagen Lupo 1.4 TDI
When and How to Change the Timing Belt on the Volkswagen Lupo 1.4 TDI
Volkswagen Lupo (1998-2005 / MK 1) Below are the main instructions on how and when to remove and replace the timing belt on the Volkswagen Lupo 1.4 TDI, as well as the Polo. The timing…
Where are the Fuses in the Volkswagen Lupo?
Where are the Fuses in the Volkswagen Lupo?
Volkswagen Lupo (1998-2005 / MK 1) Inside the Volkswagen Lupo, the installed fuse boxes contain the fuses that control the operation of various devices. The first box is located in the…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos