Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Interior Light of the Volkswagen Golf 7?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

Use a flat object to remove the upper plastic cover of the interior light, then unscrew the two Torx screws located on the sides. Also detach the plastic trim around the switch panel and remove the four screws underneath. By disconnecting the switch panel, you will see that there are still two Torx screws to remove. Once all screws are removed, proceed to unclip the plastic and disconnect the electrical connectors of the interior light. At this point, you can either replace any blown bulbs or proceed to replace the entire interior light if it is damaged.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this video, see how to remove the ceiling light mounted in the panel of a Volkswagen Golf 5. Use a screwdriver to lever between the ceiling light …
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Let's see how to remove the interior light from a Volkswagen Golf Mk5: use a screwdriver to pry between the light and the headlining panel (without b…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this guide, remove the interior light of a Volkswagen Golf 5. Use a screwdriver to lever between the light and the headlining panel (unscrew any s…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos