Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Service warning light

Today, you will see the procedure necessary to reset the routine maintenance light for the oil change on a Volkswagen Golf. First, get inside the vehicle and turn on the instrument panel, ensuring all doors are closed; then scroll through the buttons on the right stalk until you reach the settings option and then the service option, as illustrated in the video. At this point, confirm the reset of the light from the instrument panel; turn off the ignition and finally start the engine!

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light and Inspection Light on a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This short video shows you how to reset the service light and inspection light on a Volkswagen Golf 7 after performing the usual service. Resetting t…
How to reset the Service light on a Volkswagen Golf?
How to reset the Service light on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To reset the Service light on a Volkswagen Golf, press and hold the right button located at the bottom of the instrument cluster. While holding it, t…
How to reset the Service light on the Volkswagen Golf 7?
How to reset the Service light on the Volkswagen Golf 7?
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To reset the Service light on the Volkswagen Golf 7, enter the cabin and press the button marked "0.0" located in the centre of the instrument cluste…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos