Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Volkswagen T-Cross

Model: Volkswagen T Cross MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Warning light – error code

Video tutorial

This guide shows how to reset the maintenance light on a Volkswagen T-Cross Mk1. This procedure does not require diagnostic equipment and is very simple and quick. First, ensure that all doors are closed and the instrument panel is off. Press and hold the button to the left of the "0.0/SET" button and turn on the instrument panel.

At this point, a confirmation message for resetting the light will appear, and press the "0.0/SET" button to confirm the selection. Turn off and then turn on the ignition to check that the operation has been completed correctly.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to reset the engine oil warning light on a Volkswagen T-Cross
How to reset the engine oil warning light on a Volkswagen T-Cross
Volkswagen T Cross (2019-2026 / MK 1) .. oil change maintenance on the Volkswagen T-Cross. First, get inside the vehicle and turn on the ignition; press the mileage button and then press.. …
How to Reset the Service Light on the Volkswagen T-Cross?
How to Reset the Service Light on the Volkswagen T-Cross?
Volkswagen T Cross (2019-2026 / MK 1) .. On the Volkswagen T-Cross, to reset the Service light, turn on the instrument panel and press and hold the OK button located.. …
How to reset the tire pressure light in the Volkswagen T-Cross?
How to reset the tire pressure light in the Volkswagen T-Cross?
Volkswagen T Cross (2019-2026 / MK 1) .. tire pressure warning light in the Volkswagen T-Cross, an extremely simple and quick operation, to be carried out only once all scheduled maintenance.. …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos