Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Volkswagen Lavida?

Model: Volkswagen Lavida MK 1, Typ18 - Years 2008-2012
Part: Car stereo

To replace the radio in a Volkswagen Lavida, remove the trim on the dashboard that includes the glove compartment area. Once this trim is removed, you can access the screws underneath that secure the radio in its housing. After removing these screws, disconnect the connectors at the back so that the new radio can be connected. Then, secure the device with the appropriate screws, covering everything with the trim.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs in a Volkswagen Lavida?
How to Replace the Headlight Bulbs in a Volkswagen Lavida?
Volkswagen Lavida (2018-2025 / MK 3, Typ0C) As you can see in this tutorial, replacing the headlight bulbs in a Volkswagen Lavida is an extremely simple and quick task. As shown in the video, i…
How to Reset the Service Light in a Volkswagen E-Lavida?
How to Reset the Service Light in a Volkswagen E-Lavida?
Volkswagen Lavida (2018-2025 / MK 3, Typ0C) In this tutorial, you will see how to reset the service light in a Volkswagen E-Lavida, a very simple operation to perform only after completing all …
How to Install LED Headlight Bulbs on the Volkswagen Lavida
How to Install LED Headlight Bulbs on the Volkswagen Lavida
Volkswagen Lavida (2012-2018 / MK 2, Typ18) Discover in this guide how to install the LED bulbs for the headlights and fog lights of the Volkswagen Lavida, following the instructions below. Fir…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos