Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in a Volkswagen E-Lavida?

Model: Volkswagen Lavida MK 3, Typ0C - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the service light in a Volkswagen E-Lavida, a very simple operation to perform only after completing all scheduled maintenance tasks. First, insert the key but leave it in the initial position, then press and hold the button marked "0.0" located in the center of the dashboard while simultaneously turning on the ignition.

When the confirmation message appears, release the button and press it again to complete the procedure. Then restart the vehicle and check that the operation was successful.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in a Volkswagen Lavida?
How to Replace the Radio in a Volkswagen Lavida?
Volkswagen Lavida (2008-2012 / MK 1, Typ18) .. To replace the radio in a Volkswagen Lavida, remove the trim on the dashboard that includes the glove compartment area. Once this trim is.. …
How to Replace the Headlight Bulbs in a Volkswagen Lavida?
How to Replace the Headlight Bulbs in a Volkswagen Lavida?
Volkswagen Lavida (2018-2025 / MK 3, Typ0C) .. replacing the headlight bulbs in a Volkswagen Lavida is an extremely simple and quick task. As shown in the video, it is recommended to use LED bulbs.. …
How to Install LED Headlight Bulbs on the Volkswagen Lavida
How to Install LED Headlight Bulbs on the Volkswagen Lavida
Volkswagen Lavida (2012-2018 / MK 2, Typ18) .. the headlights and fog lights of the Volkswagen Lavida, following the instructions below. First, install the new LED bulbs for the front fog lights;.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos