Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Valve Pushrod Seals

Model: Volkswagen Transporter T4, MK 4 - Years 1990-2003
Part: Engine oil

An overhead valve (OHV) engine is one where the valves are located in the cylinder head, and the camshaft that operates them is generally positioned just above the valve stems. There are also designs where the camshaft is placed inside the engine block (usually next to and slightly above the crankshaft in an inline engine or directly above the crankshaft in a V engine), using pushrods to operate the rockers above the cylinder head and consequently actuate the valves: this type is called a pushrod engine. The pushrods slide within tubes, at the ends of which seals are applied: to replace them, remove the rocker cover, disassemble the rockers, pull out the pushrods and then the tubes, remove the old seals, and clean all components; brush the seal seats, insert the new seals, and proceed in reverse for installation, also adjusting the valve clearance.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Transporter (2003-2014 / T5, MK 5) In order to replace the door seal of the Volkswagen Transporter, you need to open the corresponding door and then detach the plastic coverings of the…
Volkswagen Transporter (2003-2014 / T5, MK 5) If you need to change the time setting on this vehicle model, the following description provides the information and procedure to follow, and you can…
Volkswagen Transporter (1979-1990 / T25, T3, MK 3) If a repair has been made to the cabin air duct that required opening it, i.e., breaking the welds of the plastic components (a utility knife or meta…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos