Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Immobiliser Chip from the Key of a Volkswagen Golf 5?

Model: Volkswagen Golf Golf 5, Golf V, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Key

See other generations:
Video tutorial

To remove the immobiliser chip from inside the key of the Volkswagen Golf 5, detach the top part of the remote from the bottom part by prying it open with an object. This will allow you to unscrew the screw that secures the key and the two halves of the top part of the remote.

Once opened, you will locate the immobiliser chip next to the base of the key; after it has been removed from its housing, you can replace it with a new spare part. Finally, reassemble all the components of the remote.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (1997-2003 / MK 4, Golf 4, Golf IV) To disable the immobiliser on the Volkswagen Golf, connect a diagnostic tool to the vehicle's OBD port: this will be located at the bottom left of th…
Volkswagen Golf (1997-2003 / MK 4, Golf 4, Golf IV) To disable the immobiliser on the Volkswagen Golf, press the button located on the left side of the instrument panel while it is off. At the same tim…
Volkswagen Golf (1997-2003 / MK 4, Golf 4, Golf IV) This procedure applies to both the Volkswagen Golf IV and the Skoda Octavia 1; to carry it out, you will need a four-digit numeric password. This is …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos