Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Immobiliser on the Volkswagen Golf?

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Checks and maintenance

See other generations:
Video tutorial

To disable the immobiliser on the Volkswagen Golf, connect a diagnostic tool to the vehicle's OBD port: this will be located at the bottom left of the dashboard, near the steering column. Once the scanner is connected, select the car model in question and its corresponding version; this will allow you to reset the immobiliser function by following the instructions shown in the video.

At this point, you can disconnect the scanner and insert the key into the ignition to verify that the immobiliser is disabled.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Disable the Immobiliser on the Volkswagen Golf?
How to Disable the Immobiliser on the Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To disable the immobiliser on the Volkswagen Golf, press the button located on the left side of the instrument panel while it is off. At the same tim…
How to solve the problem with the immobilizer of the Volkswagen Golf
How to solve the problem with the immobilizer of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today we will see the instructions that allow us to solve any problems with the immobilizer of the Volkswagen Golf. The immobilizer is an electrical …
How to Remove the Immobiliser Chip from the Key of a Volkswagen Golf 5?
How to Remove the Immobiliser Chip from the Key of a Volkswagen Golf 5?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To remove the immobiliser chip from inside the key of the Volkswagen Golf 5, detach the top part of the remote from the bottom part by prying it open…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos