Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Volkswagen Jetta

Model: Volkswagen Jetta A4, MK 4 - Years 1998-2005
Part: Tail light

If you need to replace a light in the rear light cluster of this vehicle, follow the instructions provided below and in the video. After opening the boot, locate the light to be removed and open the plastic panel directly behind it in the boot lining. Inside the compartment, you will find the optical unit containing the bulbs, which you can remove and replace one by one. After that, reattach the optical unit and close the plastic cover of the boot lining.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the rear brake light switch on the Volkswagen Jetta
Replacing the rear brake light switch on the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Below are the main instructions useful for removing and replacing the rear brake light switch on the Volkswagen Jetta, as well as the Golf. First, op…
How to install the rear camera on the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Let's go see the main steps that will allow us to install the rear camera on the Volkswagen Jetta. First, we open the rear hatch of the trunk and sta…
How to Reset the Oil Change Light on a Volkswagen Jetta
How to Reset the Oil Change Light on a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Before starting, sit in the driver's seat of your Volkswagen Jetta. Begin by pressing and holding the "0.0" button located below the multifunction di…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos