Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of a Volkswagen Jetta

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Rear bumper

See other generations:
Video tutorial

To remove the rear bumper of a Volkswagen Jetta, open the flap inside the boot to loosen the bolts and remove the rear light bulbs. This operation must be performed for both lights, which can then be pulled out of their housing.

Next, unscrew all the bolts securing the bumper, located at the bottom of the light housing, inside the wheel arch, and at the bottom of the bumper. Once all are removed, you can take off the bumper and replace it.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper on the Volkswagen Jetta
How to Remove the Front Bumper on the Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) To remove the front bumper on the Volkswagen Jetta, open the bonnet to loosen the fastening screws at the top of the bumper. Once these are unscrewed…
How to Remove the Front Bumper on a Volkswagen Jetta?
How to Remove the Front Bumper on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this tutorial, see how to remove the front bumper on a Volkswagen Jetta, a very simple and quick operation. First, open the bonnet, then locate th…
How to Remove the Front Bumper of the Volkswagen Jetta
How to Remove the Front Bumper of the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Briefly follow the steps to remove and replace the front bumper of the Volkswagen Jetta. First, open the bonnet of the vehicle and start unscrewing t…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos