Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Rear Bumper

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Rear bumper

See other generations:
Video tutorial

First, unscrew the three screws (three for each side) that secure the bumper inside the wheel arches using the appropriate tool. Next, unscrew the seven screws that secure the bumper from underneath.

After moving the protection inside the wheel arches, unscrew the other two screws that secure the bumper at the top. Now, open the boot lid and unscrew the rear light fittings by hand, disconnect the electrical power cables, and remove them. After unscrewing the two screws that secure the bumper in the light housing, remove the bumper by unclipping it from the clips that hold it on the sides and sliding it outwards.

For fitting the new bumper, perform the same operations in reverse order. The maintenance operation shown in the images is carried out on a Volkswagen Jetta.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of a Volkswagen Jetta
How to Remove the Rear Bumper of a Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) To remove the rear bumper of a Volkswagen Jetta, open the flap inside the boot to loosen the bolts and remove the rear light bulbs. This operation mu…
Replacing the Front Bumper on a Volkswagen Jetta
Replacing the Front Bumper on a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) In this brief guide, you will see the steps to remove and replace the front bumper on a Volkswagen Jetta. First, lift the vehicle and start by removi…
Replacing Bumper Bulb
Replacing Bumper Bulb
Volkswagen Jetta (1998-2005 / A4, MK 4) Many attempt to replace the bulb of the relevant light by inserting a screwdriver and trying to lever it out, but often this method damages either th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos