Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Golf 7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Service warning light

When you start your seventh generation Volkswagen Golf and the oil change notification appears on the display, it means it's time for a service. After completing the service, you will also need to reset this notification. First, with the engine off, press and hold the "0.0" button located on the speedometer, then turn on the ignition. You will be prompted to reset the vehicle's maintenance. To confirm, simply release the button and press it again as shown in the video.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a VW Golf 8
How to Reset the Service Light on a VW Golf 8
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) The service light reset on a Volkswagen Golf model 8 is necessary after completing the service steps. To reset the light, do the following: - Turn on…
How to reset the service on the Volkswagen Golf
How to reset the service on the Volkswagen Golf
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) Today's information will show us how to reset the service maintenance light on the Volkswagen Golf. First, we get into the car and turn on the dashbo…
How to Reset the Service Light on a Volkswagen Golf 6?
How to Reset the Service Light on a Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To reset the Service light on a Volkswagen Golf 6, turn on the ignition to access the menu on the onboard computer. Use the arrows on the right side …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos