Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the BCM Module and Fuse Box on the Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Fuse box

Today's guide will illustrate the main steps to remove and replace the BCM module and the internal fuse box on the Volkswagen Golf. First, open the driver's side front door and start unscrewing the fixing screws of the plastic cover found below, using a spanner or Torx screwdriver. Then, disconnect all the electrical wiring from the module and the fuse box to remove it, as shown in the video. At this point, replace the fuse box with the entire module if necessary, applying the reverse procedure for reassembly!

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this video, you will see where the central locking module is located on a Volkswagen Golf and how to proceed if you need to replace it, a very sim…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The video provides a very detailed technical document for the Volkswagen Golf MK6 GTI, indicating the positions of the components and complete wiring…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this video we see where the airbag module of the Volkswagen Golf IV is located: this module - it is the internal module, not the one on the steeri…

    Frequently Asked Questions

    • Golf 1997-2003 - Where are the cigarette lighter fuses located in the Volkswagen Golf IV? Read answer
    • Golf 2012-2019 - Where is the Volkswagen Golf 7 Start & Stop fuse located? Read answer
    • Golf 2003-2008 - Where is the Volkswagen Golf windshield washer pump fuse located? Read answer
    • Golf 2003-2008 - What is the Volkswagen Golf Mk5 wiper fuse? Read answer
    • Golf 2003-2008 - Where is the airbag fuse located in the Volkswagen Golf? Read answer
    • Golf 2003-2008 - Where is the VW Golf 5 radiator fan fuse located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos