Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuses on the Volkswagen ID.4?

Model: Volkswagen Id 4 MK 1 - Years 2020-2026
Part: Fuse box

The fuses for the Volkswagen ID.4 are contained within the designated fuse boxes installed in the vehicle: in this type of car, there are two boxes. The first is located at the bottom left of the steering column: this contains the fuses for the panoramic roof, rear lights, Park Assist, etc. The second fuse box is located on the right side of the engine compartment, under the windscreen: it contains the fuses for the dipped headlights, fog lights, windscreen wipers, horn, etc.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Volkswagen ID.4?
Where are the fuses located in the Volkswagen ID.4?
Volkswagen Id 4 (2020-2026 / MK 1) On board the Volkswagen ID.4, all the fuse boxes contain the fuses that regulate the operation of the devices present on the vehicle: in this type of…
Where are the fuses located in the Volkswagen ID.4?
Where are the fuses located in the Volkswagen ID.4?
Volkswagen Id 4 (2020-2026 / MK 1) All the fuses of the Volkswagen ID.4 are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will…
Where are the fuses located in the Volkswagen ID.4?
Where are the fuses located in the Volkswagen ID.4?
Volkswagen Id 4 (2020-2026 / MK 1) Each of the fuse boxes of the Volkswagen ID.4 contains the fuses that regulate the operation of the devices on the car: in this type of vehicle it wi…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos