Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to replace the EGR valve of the Volkswagen Passat 1.9 TDI.

Model: Volkswagen Passat 3C, B6 - Years 2005-2010
Part: EGR valve

In this short and simple guide, we will see the steps that will allow us to disassemble and replace the EGR valve of the Volkswagen Passat 1.9 TDI. First of all, we open the engine hood and start removing the upper plastic cover; then we disconnect the EGR valve hose by unscrewing the metal clamp screw, as shown in the video. At this point, we unscrew the fixing screws of our EGR valve to remove it; we clean it or directly replace it, installing the original one, applying the reverse procedure!


Posted on 23 September 2023 by ScegliAuto



How to remove the EGR valve on the Volkswagen Passat 2.0 TDI.
Volkswagen Passat (2005-2010 / 3C, B6) Let's briefly see the main instructions that will allow us to disassemble and remove the EGR valve of the Volkswagen Passat 2.0 TDI. First of all, we
How to replace the EGR on a Volkswagen Passat
Volkswagen Passat (2014-2023 / MK 8, B8, 3G) Replacing the Exhaust Gas Recirculation (EGR) valve on a Volkswagen Passat is a task that requires precision and attention. Make sure the engine is c
EGR valve cleaning instructions
Volkswagen Passat (1996-2005 / 3BG, B5) The function of the EGR valve is to introduce part of the exhaust gases back into the intake so that the combustion cycle is repeated and emissions a

Other guides that may interest you

    Frequently Asked Questions

    • Passat 2005-2010 - Where is the EGR valve of a Volkswagen Passat located? Read Answer

How to set the time of the new Vespa 2023

In our new mini guide dedicated to your new Vespa 2023, we'll find out how to manually change the time displayed on the central console display. So first place your Vespa on the stand. Then insert the key and start the instrument cluster. At this point locate the "Mode" button on the right knob and hold it down for a few seconds. Release it as soon as the time on the panel starts flashing and press it several times to change both the hours and minutes digits. At the end, turn off the ignition and you are done.

Watch the video!


by ScegliAuto

More videos