Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Volkswagen Key Fob?

Model: Volkswagen Volkswagen Various
Part: Key

In this tutorial, you will learn how to open a Volkswagen key fob, useful if you need to replace the battery. You will need a small flathead screwdriver or a similar tool. Start by extending the emergency metal key by pressing the designated button, then lever in the newly exposed slot until you unlock the rear cover. Once removed, you can extract the old battery, insert the replacement in the correct orientation, and reassemble everything.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the key fob of the Volkswagen remote control?
How do you replace the key fob of the Volkswagen remote control?
Volkswagen Volkswagen Various In order to replace the key of the Volkswagen remote control, you need to press the specific button on the top of the device, so that the key can be …
How to Open a Volkswagen Door with a Flat Remote Key
How to Open a Volkswagen Door with a Flat Remote Key
Volkswagen Volkswagen Various In this tutorial, you will learn how to open a Volkswagen door in an emergency, for example, due to a completely flat remote key battery. First, exte…
How to program the key of a Volkswagen vehicle
How to program the key of a Volkswagen vehicle
Volkswagen Volkswagen Various Programming the new key of a Volkswagen vehicle is a fully achievable operation independently, thanks also to our short video tutorial that will illu…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos