Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable the ESP on a Volkswagen Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Checks and maintenance

This guide briefly outlines the instructions to disable or activate the ESP control system on a Volkswagen Golf. First, get in the vehicle and start the engine; then locate the ESP activation and deactivation button on the central tunnel (when the button light is on, it means the ESP is disabled), as shown in the video. Remember that disabling the ESP compromises the vehicle's safety and road holding; therefore, it is recommended never to disable the vehicle's stability control!

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) Activating and deactivating the traction control system or ESP light on a Volkswagen Golf mk8 model vehicle is a very simple and quick operation to p…
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) The tutorial shows how to disable the ESP in a Volkswagen Golf 8 R. The ESP can be temporarily disabled for a sportier drive. With the engine running…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) In this video, see how to disable the ESP (traction control) even without the specific button. Even if your vehicle has the button, it's useful to kn…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos