Do it yourself
Frequently asked questions about cars and motorcycles

How to Activate the Sport HMI Function on the Volkswagen Golf Monitor?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

To activate the Sport HMI function on the Volkswagen Golf monitor, connect a diagnostic tool to the vehicle's OBD port, located at the lower left of the dashboard relative to the steering column. Once the scanner is connected, select the model of the car and the corresponding version; then you can perform all the operations shown in the tutorial. Finally, disconnect the scanner to verify that everything functions correctly.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The convenient parking assistance function available in the Volkswagen Golf 7 is activated as described below: with the instrument panel on, press th…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this brief guide, we will see the instructions necessary to disable the keyless function (touch opening and closing from the handle) of the Volksw…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) A very useful feature that exists on all Volkswagen Golfs, which not everyone is aware of, is the mirror tilt function when reversing, allowing you t…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos