Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Regulator Mechanism from a Volkswagen Passat

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Power window motor

In this video tutorial, you will see the instructions that allow you to remove and replace the window regulator mechanism and motor of the Volkswagen Passat. First, open the front door and start by removing the door panel, unscrewing the fastening screws; then, unscrew the screws of the window regulator mechanism, which you will find inside the holes, disconnecting the side glass from the brackets, as shown in the video. At this point, remove and replace the window regulator mechanism, securing the glass brackets and testing the operation of the window motor!

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the window motor of the Volkswagen Passat
Replacement of the window motor of the Volkswagen Passat
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) Today's video will show us how to disassemble and replace the window motor of the Volkswagen Passat, as well as the Golf, in simple steps. First, we …
Removing the Window Regulator and Door Panel on a Volkswagen Passat
Removing the Window Regulator and Door Panel on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Remove the window regulator and door panel on a Volkswagen Passat by following these steps. Before starting the disassembly, disconnect the battery t…
How do you replace the rear electric window lifter of the Volkswagen Passat B8?
How do you replace the rear electric window lifter of the Volkswagen Passat B8?
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) The guide shows how to remove the electric motor of the rear window regulator of the Volkswagen Passat b8. The first operation to be performed is to …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos