Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Gear Cable on a Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Transmission

See other generations:
Video tutorial

In this tutorial, you will learn how to adjust the gear cable on a Volkswagen Polo, a straightforward task to perform if the gear lever has excessive play. First, enter the cabin and remove the base of the gear lever gaiter.

Locate the two indicated holes and insert any tool that can act as a pivot to secure the lever. Next, open the bonnet, locate the gear mechanism, and perform the same operation.

At this point, you can disconnect the two cables, check the condition of their respective bushes, and replace them if necessary.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Remove the Gearbox from the Volkswagen Polo?
How to Remove the Gearbox from the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To remove the gearbox from the Volkswagen Polo, open the bonnet to detach the cover from the top of the engine block: then unscrew the screws securin…
How to Remove the Gearbox from the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To remove the gearbox from the Volkswagen Polo, open the bonnet to access the engine bay. Once the bonnet is open, loosen the screws and disconnect t…
How to Adjust the Handbrake Cable on the Volkswagen Polo
How to Adjust the Handbrake Cable on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) These brief and simple steps will illustrate how to adjust the handbrake cable on the Volkswagen Polo. First, get in the vehicle and start unscrewing…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos